|Brand:||RED WING SHOES|
|Uppers:||Real Leather (LEGACY)|
|Inside sole:||Leather Insole|
|Heel height:||ca. 2.5 cm|
|Shaft height:||ca. 20 cm|
|Specials:||Frame Stitched (Goodyear Welt), oil resistant TRACTION TRED Crepesole|
Red Wing Shoes Ladies Chukka Boat 3427-B ORO LEGACY Classic MOC - Brown.
Cult Ladies Red Wing Shoes Work Boots 0877-D Oro-Legacy 8 Inch Moc Toe - Braun!
Cult ladies work boat. Inspired by the working boots of the farmers of America. One of the most famous RED WING SHOES ever.
Made in the USA!
The complete shaft and heel area has no extra lining. Only the complete foot and heel area was lined with a leather lining. The special Poron insole made of leather is shock absorbing and antibacterial.
As upper material for the welted (Goodyear Welted) boot an extremely thick, oiled Oro-Legacy or Pull Up cowhide leather was used.
The matt shimmering leather was vegetable tanned.
Due to the special tanning process, the leather is very hard-wearing, water-repellent, resistant to dirt and sweat and extremely easy to care for.
The legendary MOC TOE decorative seam, which has become one of the trademarks of Red Wing Shoes over the years, is unmistakable.
In order to achieve a colour contrast, the decorative seams on the Mac Toe (visible seam in the foot area) and on the outer frame were sewn in a white shade.
The Red Wings 3427-B Oro-Legacy have a Traction Tred Crepe sole made of one piece.
The Work Boots round 105 slat has a normal foot width.
The instep height can be individually adjusted by the 10-hole leather lacing.
The 3427-B Oro-Legacy 8 Inch Moc Toe from Red Wing Shoes has a shaft height of 8 inches, approx. 20 cm.
The Traction Tred outsole has a thickness of approx. 1.5 cm and in the heel area even a thickness of approx. 2.5 cm.
The laced ankle boot has a B width.
Important hints and tips:
Due to the handcrafted production method of the Red Wing Shoes there may be differences in colour or design compared to the pictured boots!
Each pair is unique!
Waxed and oiled leather types (ORO-IGINAL leather) also require special care products.
With the welted production method, a small running-in phase must always be observed!