Red Wing Shoes ENGINEER 2990 Black Engineer boot with no steel toecap - black

Classic ladies & men's Engineer boot with no steel toecap from the Heritage Work-Engineer collection.
GroesseMenge
35.5 (4 US)
36 (4.5 US)
37 (5 US)
37.5 (5.5 US)
38 (6 US)
38.5 (6.5 US)
39 (7 US)
40 (7.5 US)
41 (8 US)
41.5 (8.5 US)
42 (9 US)
42.5 (9.5 US)
43 (10 US)
43.5 (10.5 US)
44 (11 US)
45 (11.5 US)
46 (12 US)
47 (13 US)


You have not yet selected a variant.

  • free return (EU)
  • Order by 14.00 hrs, same day shipment
  • secure thanks to SSL encryption
339,00 € incl. statutory VAT, plus shipment
Brand
Red Wing Shoes
Style No.
2990
Heel height
approx. 3 cm
Shaft height
approx. 25 cm
Shaft circumference
approx. 38 cm
Colour
Black Harness

Red Wing Shoes ENGINEER 2990 Black Engineer Boot No Steel Toecap - Black!

Red Wing Shoes Engineer Boot 2990 Black Harness Heritage Work - Black!
Classic ladies and men's engineer boots without steel toe cap. Inspired by the Work Boots, the rail construction workers of the American railway. 
The original engineer boots. Made in USA!    

Inners:
The complete shaft and heel area has no extra lining. The foot area again was worked out with a textile lining. The special brand leather sole gives the boot great flexibility from the first moment.

Uppers:
As upper material for the welted 2990 Black Harness an extremely thick, waxed cowhide leather was used. The leather was waxed in strongly, so that a very pleasant grip was created. The classic leather appearance is achieved by "finishing" the naturally tanned leather with oil.

The buckles attached to the instep and shaft area serve only for decoration, can be easily adjusted if necessary.
The oil-resistant Nitrile Cork rubber outsole is also sewn to the outer frame.
The Red Wing Shoes round 522 strip has a comfortable fit and a normal instep height.
The 2990 Black boots have a D width (medium width for women & men).

Measurements:

The 2990 Black Harness Heritage Work by Red Wing Shoes has a shaft height of approx. 25 cm.
The heel has a height of approx. 3 cm.
The Nitrile Cork rubber sole has a thickness of approx. 1 cm.
The shaft has a circumference of approx. 38 cm, but can be extended or reduced by approx. 1-3 cm depending on boot size.

Important hints and tips:

Deviations to the pictured goods: 
Due to the handcrafted production method of the Red Wing Shoes products, there may be differences in colour and design between the individual items!
Each pair of Red Wings is unique!
Waxed leather types (HARNESS) require special care products.
With the frame-sewn manufacturing method (GOODYEAR WELT) always a small running-in phase is to be considered!

 

Customer ratings for „Red Wing Shoes ENGINEER 2990 Black Engineer boot with no steel toecap - black “

Ø 4.5 / 5 stars

The most up-to-date customer ratings

2016-11-08 16:35:22
der Stiefel wird als Motorradstiefel verwendet. Red Wing Boots müssen generell""eingelaufen"" werden.Das muss man in Kauf nehmen. Der Stiefel ist nichts für Leute mit diesbezüglich empfindlichem Gemüt. Ebenso ist das kein Wanderstiefel und durch die relativ dünne,unprofilierte Sohle nichts für den Winter. Menschen mit einem übermäßig hohen Spann, werden anfangs Probleme haben, überhaupt in den Stiefel zu kommen. Der Schaft ist recht eng. Freundlicherweise liegt dem Artikel, seitens des Verkäufers, eine ""Bedienungsanleitung"" und sogar eine Plastiktüte für das ""erste Mal"" bei. Nach 3 Tagen sind die Schmerzen auch weg:) Ansonsten ist das ein echter Red Wing.Wird ewig halten! Mein erstes Paar Boots dieses Herstellers ist über 30 Jahre alt und wird immer noch getragen! Das ist preiswert!( Wie man evtl. bemerkt - ich bin Red Wing Fan! Aus Überzeugung.)
2016-10-26 16:50:36
top Qualität

Matching belts & accessoires

Similar products

Care & accessoires

Your shopping basket is empty

There are still no items in the shopping basket.

Continue shopping