Red Wing Shoes ENGINEER 2268 Black Biker Boot with Steel Toecap - Black!
Classic ladies & men engineer boots with steel toe cap. Inspired by the "Work Boots", the rail construction workers of the American railway. The "Original" Engineer Boots, Made in USA!
The complete shaft and heel area has no extra lining. The foot area has been finished with a comfortable cow split leather.
As upper material for the welted (Goodyear world) an extremely thick chrome or Pul Up cowhide leather was used. The matt shimmering leather was chrome tanned. The chrome tanning makes the leather very hard-wearing, water-repellent, resistant to dirt and perspiration and extremely easy to pluck. The buckles attached to the instep and shaft area are only for decoration, but can also be adjusted if necessary.
The oil-resistant "Neoprene Cord" rubber outsole is also available with the "Goodyear World" frame vernÃ¤ht The heel was subsequently nailed to the sole.
The "50" last of the Red Wings 2268 Safty Pull On Black Engineer boot has a normal foot width and a normal instep height, a so-called "D" width.
The 2268 Safty Pull On Black from Red Wing Shoes has a shaft height of 11 inch, approx. 28 cm. The heel has a height of approx. 4 cm. The thickness of the rubber sole is approx. 1 cm. The average shaft circumference is approx. 36.5 cm (varies depending on boot size by approx. 1-3 cm).
Due to the handcrafted production method of the Red Wing Shoes there may be differences in colour or design compared to the illustrated shoes!
Each pair of Engineer boots is unique!
Grey leather types (CHROME leather) also require special care products.
With the frame-sewn manufacturing method, a small running-in phase must always be observed!