Corral Boots E1378 Copper Ladies Western Boots - brown

Fashionable ladies cowboy boots from the CLASSIC TIMLESS collection.

You have not yet selected a variant.

  • free return (EU)
  • Order by 14.00 hrs, same day shipment
  • secure thanks to SSL encryption
259,95 € incl. statutory VAT, plus shipment
Brand
CORRAL BOOTS
Style No.
E1378
Last
56
Heel
COWBOY HEEL
Heel height
ca. 7,5 cm
Shaft height
ca. 33 cm
Shaft circumference
Colour
COPPER

Corral Boots Damen Lederstiefel E1378 Copper Embroidery & Studs Tall Top - Brown 

Top fashionable ladies western boots in vintage style made of cowhide leather.

Inners:
The shaft area was finished with a cowhide leather. In addition, the leather in the heel area is lightly padded, which gives the heel more hold after a small shrinkage phase.
The foot area was equipped with a soft leather. A special processing technique of the brand leather sole gives the boot a good flexibility.
To increase the wearing comfort the complete insole (Padded Footbed) is padded.

Uppers:
The welted Corral Boots E1378 Western boot has a waxed cowhide leather upper.
In order to achieve the very striking vintage look, the leather was brushed again at the end.
The turquoise cut-outs on the upper and foot areas are a visual highlight.

To make it easier to get into the boot, two pull straps have been incorporated.
The single layer leather outsole with light rubber inlay is sewn to the outer frame.
The 56 pointed strips of the Corral Boots have a comfortable fit and a normal span (width M - medium width for ladies).

Dimensions:

The cowboy boot E1378 Copper Embroidery & Studs Tall Top of the brand Corral Boots has a shaft height of approx. 33 cm.
The rubberized COWBOY HEEL full leather heel has a height of 2 inches approx. 5 cm.
The shaft circumference is approx. 38 cm. Depending on the shoe size, this can be extended or reduced by approx. 1 - 1.5 cm.
The thickness of the outsole is approx. 0.5 mm.
The boot has an M width (medium width for ladies).

Important hints and tips:

Due to the handcrafted production method of the Corral Boots products there may be differences in colour or design compared to the illustrated boots!
Each pair of CORRAL BOOTS Western Boots is unique!
With the welted manufacturing method (GOODYEAR WELT) a small running-in phase must always be observed!
Waxed leather types (COWHIDE & GOAT) require special care products. 
Due to the processing of decorative seams, a certain degree of caution is very important when using and caring for these article

Your shopping basket is empty

There are still no items in the shopping basket.

Continue shopping