Boulet Western Riding Boot 5176 3E Winter Laid Back Tan Spice - Brown!
Classic men's winter work boots with a THINSULATE membrane, steel toe cap and BOULET BE TOUGH sole.
Made in CANADA!
The complete inner shoe is equipped with a CAMBRELLE lining (VLIES) and a 200-Gramm-THINSULATE NSULATION membrane. The boot is breathable and moisture repellent due to the CAMBRELLE Fuuter.
This technology allows you to use the Boulet boot in any weather, because it prevents wetness caused by sweating as well as snow or rain.
The boots have a stpß damping, washable and replaceable insole.
Warm in winter and cool in summer !
The boots store the temperature of the storage environment like a thermos flask (cool in summer and warm in winter).
The stored or "remembered" temperature is kept in the boot for a certain time. So one has, on cold or wet days, warm feet. On warm days then cool feet.
The boots are water-repellent and breathable due to the insulation and the special processing of the leather.
The functional principle of the insulation is the storage of air molecules. The more air is stored in the microfibre structure of the Thinsulate Membrane, the higher the insulation value of the footwear. The fibres of Thinsulate insulation are much finer than other fibres (leather, textile, synthetics) so they can store much more air molecules and provide much better insulation. The heat emitted by the feet is kept inside the footwear. The resulting air humidity is deliberately removed from the inside of the shoe so that no drop in temperature or rise in temperature can occur.
The upper material of the welted boot Boulet 5176 is made of waxed and oiled cowhide leather.
The boot has a deep V-cut and two pull straps to make it easier to get in.
The non-slip and oil-resistant BOULET BE TOUGH sole is not sewn to the outer frame (SINGLE STICHING WELT).
The boots have a round ROUND TOE rail.
The e-width of the boots have a wide fit and comfortable instep height.
The lined western riding boot Boulet 5176 3E Winter Laid Back Tan Spice has a shaft height of 11 inches (approx. 28 cm).
The heel and outsole are made in one piece and are suitable for any surface.
The BOULET BE TOUGH sole is approx. 1.5 cm thick.
The BOULET BE TOUGH heel has a height of 1.5 inches (approx. 3.8) cm.
The boot has a shaft circumference of approx. 36 cm. Depending on the boot size, this can be extended or reduced by approx. 1-2 cm.
The boots have an E-width (wide fit for men).
Important hints and tips:
Deviations to the illustrated boots:
Due to the handcrafted production method of the Boulet products, differences in colour or design can occur compared to the illustrated boots!
Each pair of BOULET western riding boots is unique!
Waxed and oiled leathers (LAID BACK) also require special care products.
With the welted production method (GOODYEAR WELT), a small running-in phase must always be observed!
The spurs and spore straps shown are not included in the scope of delivery!